Testimonials
I recently bought the 98E T-Post driver. I had to travel to another state to help my father put in fencing on two sides of his 10 acres. Each side was 660 feet, and I only had 6 days to clear all the old brush, trees and get the entire fence up in 6 days. It would have been impossible with out this tool, It was a complete life saver.
After talking to my father when we had originally thought about doing it all manually, there would have been no way to complete the job with the time frame I had to help him, not to mention saving our backs, shoulders and arms.
Even though I think hands down this is an awesome tool there is room for a little improvement. If there would also be a handle on the post tighter screw it would help stabilize the post driver when you hit hard objects such as small rocks or tree roots and the post driver wants to move slightly. Also the Handle that is already supplied could be just a little longer, most people that operate them are men and have bigger hands and if it were approximately 2 inches longer it would make it easier to hold on to.
I would definitely suggest this tool to anyone.
Arlin Robb
"We have been using our post driver for 3 years and driven approximately 3500 posts. Aside from normal maintenance we have had very few problems. It allows us to drive posts in our rocky Ozarks soil. Repair parts are sent out quickly. Thanks for a great product."
I just wanted to let you know that I tried out my new post
driver last weekend. Including a couple little glitches it totally
out performed my expectations. We drove 264 6' tee posts 2' in the ground in 8
hours. The soil had a little moisture in it which helped tremendously because
it is usually hard pan all the way. None the less this is my huge thank you!
Thank you for making a driver that I could afford to buy and then actually does
the job too!
Thanks,
Terry Wiese
Hurricane, UT
"I am very impressed with my Man Saver T-Post Driver. I would never have completed the fencing job on my premises without the use of this handy tool. I installed six hundred feet of electric fence material with the use of your excellent tool in what appears to me to be cement type hardpan. After I purchased my post driver from you, I started to have reservations on whether your product would work in this kind of soil. I was very surprised! It worked great! This tool took quite a beating and so did I, but the job got done. Thank you for manufacturing a useful, quality product."
-- Cliff Alexander, Tahuyah, Washington
"Whole company gives THUMBS UP! on the Man Saver T-Post Driver."
-- Roy Reed, Spring Valley Development, Colorado
"This is just a note to let you know the post driver I bought works great. The soil is very dry and hard, but the driver puts the posts down. It's a good product."
-- Jasper Edwards, Condon, Oregon
I just wanted to drop you a line, to tell you how happy I am, with your product. I purchased your 99E-X driver about a month ago to drive in a new well point.
My current water point had gone bad. It had been put in over 30 years ago and the pipes had rusted and created leaks. Absolutely no plumber in the state would drive in a new point, or work on one period. They all told me to put in a well. No one uses a point anymore. I called around and I received 3 estimates to put in a well. Several of my neighbors had used these companies and the average well depth seemed to be 660 feet, at a cost of more than $10,000.
After buying your product, the new pipe, well point and fittings at a total cost of less than $1,000. I put in my new point at which is working wonderfully. It took me 2 ½ hours to driver over 25 feet of galvanized pipe in the ground. All while working in a space where I could barely stand, my basement.
Thanks again for the great product and the great customer service that I received on the phone.
-- Tom Hewitt North Randolph, VT
I bought my post driver about 2 years ago but didn’t get to use it until recently. I drove about 40 t-posts in about an hour while building an entryway gate I needed to drive in a 2 3/8” kicker in some tough soil. I put 5ft of pipe in the ground in approx. 30 minutes. I’m so glad I bought it because my new place that I just bought needs all new fencing. It’s going to make my life much easier.
-- John Rockafellow, Zephyr, TX
We recently bought our first small ranch. We have many fence lines to repair, and new fences to run. We spent a few weeks in the summer driving t-posts by hand, 2 of us swapping out every few minutes. It was incredibly hard work. I knew there must be an easier way. I found a pneumatic t-post driver at my local tractor supply store, however it was just not very successful, and we returned it the same week. I searched online and came across your product.
After watching the online video I decided we would give it a try. Let me tell you a little about our property, we have several areas of very hard ground, it is not uncommon to wear out a set of bits on our post hole digger on just one hole (this is hard dirt, and not rock). I was skeptical your product would be able to drive posts into this ground; your website claimed your product “drives wherever a 35 lb. hand driver will work”, and we had driven posts using such driver (it could take 3 or 4 minutes a post, or longer when physical exhaustion set in).
We recently took the new driver out to set a new fence line, I loaded the driver, a 10 gallon compressor and a gas powered generator into the bed of my pickup and set off to the top pasture with my laborer. We took the old manual “human powered” driver too, fully expecting to have to use it at times. Your product could only drive t-posts as deep on each stroke as we had been doing preciously by hand, it did however drive them much more quickly between strokes, and did not require rest breaks. I am not exaggerating when I tell you we set our fence line in half a day, when this would normally have taken 2 to 3 days! The first time we used it we made fools of ourselves, as the unit effortlessly drove the posts into the ground my laborer and I jumped up and down like giddy school children.
Having used other pneumatic drivers without success, I strongly recommend this product.
Thank you for saving me from tired muscles and an aching back!
--David Andrews, Azle, TX
1.800.980.7599 | info@rohrermfg.com